In the first step, this tutorial shows you how to carry out a modal analysis to determine the natural frequencies and mode shapes. You will create a specific load case and assign the relevant masses. Then you will adjust the modal analysis settings so that the effective modal masses are determined in accordance with the Eurocode recommendations.
Modal Analysis
Duration: 00:59:06 min
Duration: 01:08:55 min
Duration: 00:51:02 min
General
Duration: 00:01:06 min
Duration: 00:00:30 min
Duration: 00:01:11 min
General
Duration: 00:00:41 min
General
Duration: 00:00:52 min
Duration: 00:02:14 min
This article provides a detailed overview of the export features from RFEM 6 and RSTAB 9 to AutoCAD/DXF files, including options for exporting dimensions, FE meshes, and deformed shapes.
This article provides a detailed overview of the import features from RFEM 6 and RSTAB 9 to AutoCAD/DXF files.
This technical article addresses the direct deformation analysis of reinforced concrete beams considering the long-term effects of creep and shrinkage. The direct calculation according to Eurocode 2 (EN 1992-1-1, Section 7.4.3) is explained using a single-span beam. Particular emphasis is placed on tension stiffening, behavior in the cracked state based on the distribution factor (damage parameter), and consideration of shrinkage and creep behavior.
How does single sign-on work with RFEM 6?
.png?mw=350&hash=dc38fc2ddc3754a07164885d9707318b00be194d)
In the Snow Load Wizard, you can optionally consider snow overhang and snow guard when generating snow loads according to Eurocode.
The Construction Stages Analysis (CSA) add-on allows you to modify the object and design properties of members, surfaces, and so on, in the individual construction stages.
During the calculation, you can display the model deformation for the calculation steps graphically in the calculation progress window.
In the wind simulation, it is possible to consider member coatings (for example, from ice loads).
How can I find out which graphics card is actually used by RFEM 6?
I'm experiencing problems with the graphics card. What can I do?
Can I use the Dlubal API in Rhino and Grasshopper?
In the Steel Joints add-on, I get high utilization ratios for preloaded bolts in the tension design. Where do these high utilization ratios come from and how can I evaluate the load-bearing reserves of the bolt?
Can I optimize parametric cross-sections?
How can I define RSECTION cross-sections in Grasshopper?
-querkraft-hertha-hurnaus.jpg?mw=350&hash=3306957537863c7a7dc17160e2ced5806b35a7fb)
