The default settings are loaded for every new file. If you wish to change them, you have to create a new profile after making the desired changes and set it as "Default" (see the image). If you now start a new file, this setting remains saved. It is also possible to create several profiles, which can subsequently be loaded and managed.
Question
How do I change the default settings for the units so they are preset in every new file?
![Basic Shapes of Membrane Structures [1]](/en/webimage/009595/2419502/01-en-png-png.png?mw=512&hash=6ca63b32e8ca5da057de21c4f204d41103e6fe20)
![KB 001879 | Influence of Bending Stiffness of Cables](/en/webimage/049953/3835546/Seil.png?mw=512&hash=83e64fde3c3d0a1d2649d8e64587b93f4ab71876)
![KB 001848 | Timber Column Design as per 2018 NDS Standard in RFEM 6](/en/webimage/040983/3525158/Timber_Column_for_KB_1848.png?mw=512&hash=8767c3300658d77c253bb7ff632327937a04dd95)
![Feature 002843 | Dimensioning with Result Function](/en/webimage/051576/3982510/1.png?mw=512&hash=9d7f6c198b6d4ae6ee8f2fa8bca75f85579e14c9)
For design objects, you can optionally display sags or extreme results.
![Feature 002423 | Displaying Results in Solids](/en/webimage/031923/3325382/FE_Solid_EN.jpg?mw=512&hash=d2950a5e2123942fab13aad296e814c67695c955)
The results of solid stresses can be displayed as colored 3D points in the finite elements.
![Improved Calculation Performance by Optimized Consideration of Nodal Degrees of Freedom in RFEM](/en/webimage/015531/2983511/Berechnungsperformance_EN_(1).png?mw=512&hash=ea9bf0ab53a4fb0da5c4ed81d32d53360ab2820c)
The number of degrees of freedom in a node is no longer a global calculation parameter in RFEM (6 degrees of freedom for each mesh node in 3D models, 7 degrees of freedom for the warping torsion analysis). Thus, each node is generally considered with a different number of degrees of freedom, which leads to a variable number of equations in the calculation.
This modification speeds up the calculation, especially for models where a significant reduction of the system could be achieved (for example, trusses and membrane structures).
![Extended Display of Surface Strains](/en/webimage/012851/2635393/N_386_02.png?mw=512&hash=8ca45b89302044b96809c681e2688d15a0f63fe4)
Display extended strains of members, surfaces, and solids (for example, the important principal strains, equivalent total strains, and so on) in the Project Navigator - Results in RFEM as well as in Table 4.0.
For example, you can display governing plastic strains when performing the plastic design of connections with surface elements.