Structural Engineering | Radoslav Dimitrov Student of Civil Engineering at the Technical University in Dresden, Germany |
Design of Railway Bridge Superstructure
Project Specifications
Model Data
Do you have any questions?
![KB 001861 | Plate Girder Design According to AISC 360-16](/en/webimage/045361/3639107/PG1.png?mw=512&hash=9fc408f20e02e54869b23dd856e9bcc4acc1f365)
![Construction Stages in RFEM 6](/en/webimage/026130/3182044/1._Construction_Stages.png?mw=512&hash=bc4b40db376f830a5be0a7d113fa3604599f9767)
![Member Load Initial Prestress](/en/webimage/010511/2965190/01_Anfangsvorspannung_en.png?mw=512&hash=7f5b2f6b895eb9651b6e20fa060cab1aee3c1868)
![Load Case Calculation Parameters](/en/webimage/009792/2420432/01-en-png-png.png?mw=512&hash=6ca63b32e8ca5da057de21c4f204d41103e6fe20)
![Effective Cross-Section in SHAPE-THIN 8](/en/webimage/006822/484232/DUENQ.png?mw=512&hash=96d43be20a4528cf741503961d2b0429d7f70ef4)
In SHAPE-THIN 8, the effective cross-section of stiffened buckling panels can be calculated according to EN 1993-1-5, Cl. 4.5.
The critical buckling stress is calculated according to EN 1993-1-5, Annex A.1 for buckling panels with at least 3 longitudinal stiffeners, or according to EN 1993-1-5, Annex A.2 for buckling panels with one or two stiffeners in the compression zone. The design for torsional buckling safety is also performed.
![Feature 002820 | Limit Plastic Strain for Welds](/en/webimage/050344/3881226/1.png?mw=512&hash=9d7f6c198b6d4ae6ee8f2fa8bca75f85579e14c9)
In the ultimate configuration of the steel joint design, you have the option to modify the limit plastic strain for welds.
![Component "Base Plate"](/en/webimage/050345/3936120/50345.png?mw=512&hash=3bd641cb1a2445804b338855e4debfc40c6563e9)
The "Base Plate" component allows you to design base plate connections with cast-in anchors. In this case, plates, welds, anchorages, and steel-concrete interaction are analyzed.
![Feature 002807 | 3D Display of FSM Results](/en/webimage/049281/3861162/2024-05-01_10-32-55.png?mw=512&hash=2377d291bc20ac3d78d617b50c131614e99ac6f7)
In the "Edit Section" dialog box, you can display the buckling shapes of the Finite Strip Method (FSM) as a 3D graphic.